Widespread incomplete lineage sorting and introgression shaped adaptive radiation in the Gossypium genus.

Cotton (Gossypium) stands as a crucial economic crop, serving as the primary source of natural fiber for the textile sector. However, the evolutionary mechanisms driving speciation within the Gossypium genus remain unresolved. In this investigation, we leveraged 25 Gossypium genomes and introduced four novel assemblies-G. harknessii, G. gossypioides, G. trilobum, and G. klotzschianum (Gklo)-to delve into the speciation history of this genus. Notably, we encountered intricate phylogenies potentially stemming from introgression. These complexities are further compounded by incomplete lineage sorting (ILS), a factor likely to have been instrumental in shaping the swift diversification of cotton. Our focus subsequently shifted to the rapid radiation episode during a concise period in Gossypium evolution. For a recently diverged lineage comprising G. davidsonii, Gklo, and G. raimondii, we constructed a finely detailed ILS map. Intriguingly, this analysis revealed the non-random distribution of ILS regions across the reference Gklo genome. Moreover, we identified signs of robust natural selection influencing specific ILS regions. Noteworthy variations pertaining to speciation emerged between the closely related sister species Gklo and G. davidsonii. Approximately 15.74% of speciation structural variation genes and 12.04% of speciation-associated genes were estimated to intersect with ILS signatures. These findings enrich our understanding of the role of ILS in adaptive radiation, shedding fresh light on the intricate speciation history of the Gossypium genus.

Durable and rechargeable antimicrobial cotton driven by enhanced UV stability and real-time detection of biocidal factors.

In this study, graphene oxide/N-halamine nanocomposite was synthesized through Pickering miniemulsion polymerization, which was then coated on cotton surface. The modified cotton exhibited excellent superhydrophobicity, which could effectively prevent microbial infestation and reduce the probability of hydrolysis of active chlorine, with virtually no active chlorine released in water after 72 h. Deposition of reduced graphene oxide nanosheets endowed cotton with ultraviolet-blocking properties, attributing to enhanced UV adsorption and long UV paths. Moreover, encapsulation of polymeric N-halamine resulted in improved UV stability, thus extending the life of N-halamine-based agents. After 24 h of irradiation, 85 % of original biocidal component (active chlorine content) was retained, and approximately 97 % of initial chlorine could be regenerated. Modified cotton has been proven to be an effective oxidizing material against organic pollutants and a potential antimicrobial substance. Inoculated bacteria were completely killed after 1 and 10 min of contact time, respectively. An innovative and simple scheme for determination of active chlorine content was also devised, and real-time inspection of bactericidal activity could be achieved to assure antimicrobial sustainability. Moreover, this method could be utilized to evaluate hazard classification of microbial contamination in different locations, thus broadening the application scope of N-halamine-based cotton fabrics.

CottonMD: a multi-omics database for cotton biological study.

Cotton is an important economic crop, and many loci for important traits have been identified, but it remains challenging and time-consuming to identify candidate or causal genes/variants and clarify their roles in phenotype formation and regulation. Here, we first collected and integrated the multi-omics datasets including 25 genomes, transcriptomes in 76 tissue samples, epigenome data of five species and metabolome data of 768 metabolites from four tissues, and genetic variation, trait and transcriptome datasets from 4180 cotton accessions. Then, a cotton multi-omics database (CottonMD, http://yanglab.hzau.edu.cn/CottonMD/) was constructed. In CottonMD, multiple statistical methods were applied to identify the associations between variations and phenotypes, and many easy-to-use analysis tools were provided to help researchers quickly acquire the related omics information and perform multi-omics data analysis. Two case studies demonstrated the power of CottonMD for identifying and analyzing the candidate genes, as well as the great potential of integrating multi-omics data for cotton genetic breeding and functional genomics research.

Chemical Composition and Thermogravimetric Behaviors of Glanded and Glandless Cottonseed Kernels.

Common "glanded" (Gd) cottonseeds contain the toxic compound gossypol that restricts human consumption of the derived products. The "glandless" (Gl) cottonseeds of a new cotton variety, in contrast, show a trace gossypol content, indicating the great potential of cottonseed for agro-food applications. This work comparatively evaluated the chemical composition and thermogravimetric behaviors of the two types of cottonseed kernels. In contrast to the high gossypol content (3.75 g kg-1) observed in Gd kernels, the gossypol level detected in Gl kernels was only 0.06 g kg-1, meeting the FDA's criteria as human food. While the gossypol gland dots in Gd kernels were visually observed, scanning electron microcopy was not able to distinguish the microstructural difference between ground Gd and Gl samples. Chemical analysis and Fourier transform infrared (FTIR) spectroscopy showed that Gl kernels and Gd kernels had similar chemical components and mineral contents, but the former was slightly higher in protein, starch, and phosphorus contents. Thermogravimetric (TG) processes of both kernels and their residues after hexane and ethanol extraction were based on three stages of drying, de-volatilization, and char formation. TG-FTIR analysis revealed apparent spectral differences between Gd and Gl samples, as well as between raw and extracted cottonseed kernel samples, indicating that some components in Gd kernels were more susceptible to thermal decomposition than Gl kernels. The TG and TG-FTIR observations suggested that the Gl kernels could be heat treated (e.g., frying and roasting) at an optimal temperature of 140-150 °C for food applications. On the other hand, optimal pyrolysis temperatures would be much higher (350-500 °C) for Gd cottonseed and its defatted residues for non-food bio-oil and biochar production. The findings from this research enhance the potential utilization of Gd and Gl cottonseed kernels for food applications.

In Vitro Anti-Inflammatory Activity of Essential Oil and ß-Bisabolol Derived from Cotton Gin Trash.

Natural α-bisabolol has been widely used in cosmetics and is sourced mainly from the stems of Candeia trees that have become endangered due to over exploitation. The in vitro anti-inflammatory activity of cotton gin trash (CGT) essential oil and the major terpenoid (ß-bisabolol) purified from the oil were investigated against lipopolysaccharide (LPS)-stimulated RAW264.7 macrophages as well as the 3t3 and HS27 fibroblast cell lines. Nitric oxide (NO), prostaglandin E2 (PGE2), tumor necrosis factor-alpha (TNF-α), interleukin 6 (IL-6), and interleukin 8 (IL-8) were measured using Greiss reagent, enzyme-linked immunosorbent assay (ELISA), and cytokine bead array (CBA)-flow cytometry. Non-toxic concentrations of CGT oil and ß-bisabolol (1.6-50.0 µg/mL) significantly inhibited the production of the inflammatory mediators in a dose-dependent manner. Maximal inhibition by ß-bisabolol was 55.5% for NO, 62.3% for PGE2, and 45.3% for TNF-α production in RAW cells. ß-Bisabolol induced a level of inhibition similar to an equal concentration of α-bisabolol (50.0 µg/mL), a known anti-inflammatory agent. These results suggest ß-bisabolol exerts similar in vitro effects to known topical anti-inflammatory agents and could therefore be exploited for cosmetic and therapeutic uses. This is the first study to report the in vitro anti-inflammatory activity of ß-bisabolol in CGT essential oil.

Cottonseed extracts regulate gene expression in human colon cancer cells.

Cotton plant provides economically important fiber and cottonseed, but cottonseed contributes 20% of the crop value. Cottonseed value could be increased by providing high value bioactive compounds and polyphenolic extracts aimed at improving nutrition and preventing diseases because plant polyphenol extracts have been used as medicinal remedy for various diseases. The objective of this study was to investigate the effects of cottonseed extracts on cell viability and gene expression in human colon cancer cells. COLO 225 cells were treated with ethanol extracts from glanded and glandless cottonseed followed by MTT and qPCR assays. Cottonseed extracts showed minor effects on cell viability. qPCR assay analyzed 55 mRNAs involved in several pathways including DGAT, GLUT, TTP, IL, gossypol-regulated and TTP-mediated pathways. Using BCL2 mRNA as the internal reference, qPCR analysis showed minor effects of ethanol extracts from glanded seed coat and kernel and glandless seed coat on mRNA levels in the cells. However, glandless seed kernel extract significantly reduced mRNA levels of many genes involved in glucose transport, lipid biosynthesis and inflammation. The inhibitory effects of glandless kernel extract on gene expression may provide a useful opportunity for improving nutrition and healthcare associated with colon cancer. This in turn may provide the potential of increasing cottonseed value by using ethanol extract as a nutrition/health intervention agent.

Bioinspired Self-Powered Piezoresistive Sensors for Simultaneous Monitoring of Human Health and Outdoor UV Light Intensity.

The exact fabrication of precise three-dimensional structures for piezoresistive sensors necessitates superior manufacturing methods or tooling, which are accompanied by time-consuming processes and the potential for environmental harm. Herein, we demonstrated a method for in situ synthesis of zinc oxide nanorod (ZnO NR) arrays on graphene-treated cotton and paper substrates and constructed highly sensitive, flexible, wearable, and chemically stable strain sensors. Based on the structure of pine trees and needles in nature, the hybrid sensing layer consisted of graphene-attached cotton or paper fibers and ZnO NRs, and the results showed a high sensitivity of 0.389, 0.095, and 0.029 kPa-1 and an ultra-wide linear range of 0-100 kPa of this sensor under optimal conditions. Our study found that water absorption and swelling of graphene fibers and the associated reduction of pore size and growth of zinc oxide were detrimental to pressure sensor performance. A random line model was developed to examine the effects of different hydrothermal times on sensor performance. Meanwhile, pulse detection, respiration detection, speech recognition, and motion detection, including finger movements, walking, and throat movements, were used to show their practical application in human health activity monitoring. In addition, monolithically grown ZnO NRs on graphene cotton sheets had been integrated into a flexible sensing platform for outdoor UV photo-indication, which is, to our knowledge, the first successful case of an integrated UV photo-detector and motion sensor. Due to its excellent strain detection and UV detection abilities, these strategies are a step forward in developing wearable sensors that are cost-controllable and high-performance.

Structure reorganization of cellulose hydrogel by green solvent exchange for potential plastic replacement.

Petroleum-based plastics have raised great environmental concerns from the beginning of their production to the end-of-life cycle. It is urgently needed to develop sustainable and green materials with certain plastic properties. Herein, biobased cellulose films are fabricated from low quality cotton cellulose by manipulating its hydrogen bonding network with green solvents. The cellulose is dispersed in inorganic salts (ZnCl2/CaCl2) to form ionic hydrogels, and then transformed into tough and flexible films through ethanol exchange and air drying. Without extra hot-pressing treatment, the aggregate structure of cellulose is re-organized with the disruption and re-construction of hydrogen bonds. Benefiting from the densely packed structure and highly in-plane orientation, the cellulose film presents outstanding optical, thermal and mechanical properties. Such cellulose materials hold a potential for plastic replacement in the field of biodegradable packing.

Physicochemical features, functional characteristics, and health benefits of cottonseed oil: a review / Benefícios à saúde humana e características físico-químicas e funcionais do óleo de semente de algodão: uma revisão

Vegetable oils have their specific physicochemical properties due to which they are playing vital role in human nutritional diet for health benefits. Cottonseed oil is obtained from various species of cotton seeds that are famous to be grown mainly for their fiber quality. The most prominently used specie is Gossypium hirsutum. It is obvious that the seeds of different variety of cotton vary as grown in diverse agroclimatic conditions with respect to oil, fats and protein contents. Cottonseed oil is routinely used for cooking and food manufacturing products. Cottonseed oil obtained after proper extraction/processing steps from crude state to refined oil in a variety of ways. Cotton crop is considered for their dual-use purpose, for fiber quality and oil production to promote health benefits in the world. Keeping in view the above facts, this review clearly demonstrated an overview about physicochemical and functional properties of cottonseed oil to promote health benefits associated with the use of this oil. The overall characteristics and all concerned health benefits of CSO will further improve their usefulness is a compact way. We have summarized a brief multi-dimensional features of CSO in all aspects up to the best of our knowledge fort he end researchers who can further research in the respective aspect.

Os óleos vegetais têm propriedades físico-químicas específicas que desempenham um papel vital na dieta nutricional humana em benefício à saúde. O óleo de semente de algodão, utilizado rotineiramente no preparo e na fabricação de alimentos, é obtido através de várias espécies de sementes de algodão, famosas pela alta qualidade de sua fibra, cuja espécie mais utilizada é Gossypium hirsutum. As sementes variam, em relação ao teor do óleo, da gordura e das proteínas, de acordo com o cultivo e as diversas condições agroclimáticas. O óleo de algodão é obtido após etapas adequadas de extração das sementes e processamento do estado bruto ao refinado. Assim, a presente revisão demonstra, de maneira geral, as propriedades físico-químicas e funcionais do óleo de semente de algodão e seus benefícios à saúde humana, resumindo suas características multidimensionais. As características gerais e todos os benefícios do composto podem melhorar ainda mais se utilizadas de forma compacta, auxiliando futuros pesquisadores.

Foliar herbivory increases sucrose concentration in bracteal extrafloral nectar of cotton.

Cultivated cotton, such as Gossypium hirsutum L., produces extrafloral (EF) nectar on leaves (foliar) and reproductive structures (bracteal) as an indirect anti-herbivore defense. In exchange for this carbohydrate-rich substance, predatory insects such as ants protect the plant against herbivorous insects. Some EF nectar-bearing plants respond to herbivory by increasing EF nectar production. For instance, herbivore-free G. hirsutum produces more bracteal than foliar EF nectar, but increases its foliar EF nectar production in response to herbivory. This study is the first to test for systemically induced changes to the carbohydrate composition of bracteal EF nectar in response to foliar herbivory on G. hirsutum. We found that foliar herbivory significantly increased the sucrose content of bracteal EF nectar while glucose and fructose remained unchanged. Sucrose content is known to influence ant foraging behavior and previous studies of an herbivore-induced increase to EF nectar caloric content found that it led to increased ant activity on the plant. As a follow-up to our finding, ant recruitment to mock EF nectar solutions that varied in sucrose content was tested in the field. The ants did not exhibit any preference for either solution, potentially because sucrose is a minor carbohydrate component in G. hirsutum EF nectar: total sugar content was not significantly affected by the increase in sucrose. Nonetheless, our findings raise new questions about cotton's inducible EF nectar responses to herbivory. Further research is needed to determine whether an herbivore-induced increase in sucrose content is typical of Gossypium spp., and whether it constitutes a corollary of systemic sucrose induction, or a potentially adaptive mechanism which enhances ant attraction to the plant.

Cottonseed-derived gossypol and ethanol extracts differentially regulate cell viability and VEGF gene expression in mouse macrophages.

Vascular endothelial growth factor (VEGF) plays an important role in chronic inflammation associated with several diseases. Many plant extracts have nutritional and healthy benefits by down-regulating VEGF expression, but there was no report on VEGF regulation by cottonseed extracts in any biological system. The objective was to investigate cell viability and VEGF expression regulated by gossypol and ethanol extracts using lipopolysaccharides (LPS) as a control. MTT, qPCR and immunoblotting techniques were used to monitor cell viability, VEGF mRNA and protein levels in mouse RAW264.7 macrophages. Gossypol dramatically reduced macrophage viability but cottonseed extracts and LPS exhibited minor effect on cell viability. VEGFb mRNA levels were approximately 40 fold of VEGFa in the macrophages. Gossypol increased VEGFa and VEGFb mRNA levels up to 27 and 4 fold, respectively, and increased VEGF protein. LPS increased VEGFa mRNA by sixfold but decreased VEGFb mRNA. LPS increased VEGF protein in 2-4 h but decreased in 8-24 h. Glanded seed extracts showed some stimulating effects on VEGF mRNA levels. Glandless seed coat extract showed increased VEGFb mRNA levels but its kernel extract reduced VEGF mRNA levels. This study demonstrated that gossypol and ethanol extracts differentially regulated cell viability and VEGF expression in mouse macrophages.

Hemocompatibility, biodegradability and acute toxicity of acetylated cellulose nanocrystals of different types in comparison.

Promotion of promising cellulose nanocrystals (CNC) is largely dependent on the relationship between their morphology, surface chemical composition, and supramolecular structure with toxicity, hemocompatibility, and biodegradability. This paper outlines comparative and integrated analysis of the mentioned biocompatibility aspects of partially acetylated rod-, and disc-lake morphology of CNC with crystalline cellulose allomorphs I and II. These data have also included the study of CNC obtained from the sulfuric acid solutions. The aqueous solution of all types of tested CNC has not been toxic to mice after oral administration. Morphology of internal organs has not changed. However, in case of disc-like particles, the kidney mass coefficient noticeably changed. CNC have neither triggered platelet aggregation nor destroyed the red cell membrane. Intravenous administration to rabbits has not affected the plasma clotting time. Rod-like CNC are more resistant, and the disc-like particles are more susceptible to degradation under the influence of cellulases.

Metabolic pathway analysis of walnut endophytic bacterium Bacillus subtilis HB1310 related to lipid production from fermentation of cotton stalk hydrolysate based on genome sequencing.

OBJECTIVES: In this study, genome sequencing and metabolic analysis were used to identify and verify the key metabolic pathways for glucose and xylose utilization and fatty acid synthesis in the walnut endophytic bacterium (WEB) Bacillus subtilis HB1310. RESULTS: The genome sequence of WEB HB1310 was generated with a size of 4.1 Mb and GC content of 43.5%. Genome annotation indicated that the Embden-Meyerhof-Parnas, pentose phosphate, and fatty acid synthesis pathways were mainly involved in mixed sugar utilization and lipid production. In particular, diverse and abundant fatty acid synthesis genes were observed in a higher number than in other Bacillus strains. The tricarboxylic acid cycle competitively shared the carbon flux flowing before 48 h, and the acetic acid fermentation competed after 72 h. Moreover, fatty acid synthase activity was highly correlated with lipid titer with a correlation coefficient of 0.9626, and NADPH might be more utilized for the lipid synthesis within 48 h. CONCLUSIONS: This study is the first attempt to explain the metabolic mechanism of mixed sugar utilization and lipid production based on genomic information, which provides a theoretical basis for the metabolic regulation of bacterial lipid production from lignocellulosic hydrolysates.

Ethnobotanical and antimicrobial activities of the Gossypium (Cotton) genus: A review.

ETHNOPHARMACOLOGICAL RELEVANCE: The Malvaceae family, an important group of plants that have the Gossypium (cotton) genus has been used in folk medicine to treat microbial diseases and symptoms. AIMS OF THE STUDY: This article aims to understand its ethnobotany expression in communities and scientific elucidation of antimicrobial activities of this genus through literature review. MATERIALS AND METHODS: The bibliographic survey was carried out from 1999 to 2019 with keywords combinations such as "Gossypium + ethnobotanical", " Gossypium + medicinal ", "Gossypium + the biological activity" in scientific databases as Pubmed, Scopus, Web of Science, DOAJ, Scielo, Bireme. RESULTS: After data analysis, we found that the Gossypium genus, specifically Gossypium hirsutum, G. barbadense, G. herbaceum, G. arboreum are the species most cited in the treatment of microbial diseases and symptoms in communities all over the world. In light of scientific elucidation of biological activities, the Gossypium genus has been used to treat protozoal, bacterial, fungal, and viral diseases. CONCLUSIONS: The review demonstrated that the Gossypium genus is a promising source of biological activities against microbial diseases, especially in the treatment of protozoal diseases like malaria.

Towards to understanding the preliminary loss and absorption of nitrogen and phosphorus under different treatments in cotton drip- irrigation in northwest Xinjiang.

Drip irrigation under plastic mulch is widely used in Xinjiang, Northwest China. It can not only save water, but also reduce nutrient loss and improve fertilizer utilization. However, it is not clear whether the leaching occurs or not, what is the leaching amount? What is the relationship among fertilization, irrigation regimes, loss, cotton absorption, and cotton field under different fertilization and irrigation management under drip irrigation? Studying these issues not only provides reference for the formulation of fertilization and irrigation systems, but also is of great significance for reducing non-point source pollution. A long-term positioning experiment was conducted from 2009 to 2012 in Baotou Lake farm in Korla City, Xinjiang, with drip-irrigated cotton (Gossypium hirsutum L.) under different N fertilizer and irrigation amounts. The treatments were designed comprising Control (CK,0 N, 0 P, and 0 K with an irrigation of 480 mm) and the following three other treatments: (1) Conventional fertilize and irrigation (CON, 357 kg N hm-2, 90 kg P hm-2, 0 kg K hm-2, and irrigation of 480 mm); (2) Conventional fertilization and Optimizing irrigation (OPT, 357 kg N hm-2, 90 kg P hm-2, 62 kg K hm-2, and irrigation of 420 mm); and (3) Optimizing fertilization and irrigation (OPTN, 240 kg N hm-2, 65 kg P hm-2, 62 kg K hm-2, and irrigation of 420 mm). The results found that the leaching would occur in arid area under drip irrigation. The loss of total N, NH4+, P, N and P loss coefficient was higher under conventional fertilize and irrigation treatment while the loss of NO3- was higher under conventional fertilization and optimizing irrigation treatment. The correlations among N, P absorption by cotton, loss of NH4+ and total phosphorus were quadratic function. The total nitrogen loss and cumulative nitrogen application was lineally correlated. The loss of NO3- and cumulative nitrogen application was exponential. The nitrogen and phosphorus absorption by cotton under conventional fertilization and optimizing irrigation treatment was 24.53% and 35.86% higher than that in conventional fertilize and irrigation treatment, respectively. The cotton yield under conventional fertilization and optimizing irrigation treatment obtained higher than that in other three treatments. Therefore, the conventional fertilization and optimizing irrigation treatment was the optimal management of water and fertilizer in our study. These results demonstrate that reasonable water, nitrogen and phosphorus fertilize could not only effectively promote the absorption of nitrogen and phosphorus, but also reduce nitrogen and phosphorus losses under drip fertigation and plastic mulching.

Explore the gene network regulating the composition of fatty acids in cottonseed.

BACKGROUND: Cottonseed is one of the major sources of vegetable oil. Analysis of the dynamic changes of fatty acid components and the genes regulating the composition of fatty acids of cottonseed oil is of great significance for understanding the biological processes underlying biosynthesis of fatty acids and for genetic improving the oil nutritional qualities. RESULTS: In this study, we investigated the dynamic relationship of 13 fatty acid components at 12 developmental time points of cottonseed (Gossypium hirsutum L.) and generated cottonseed transcriptome of the 12 time points. At 5-15 day post anthesis (DPA), the contents of polyunsaturated linolenic acid (C18:3n-3) and saturated stearic acid (C18:0) were higher, while linoleic acid (C18:2n-6) was mainly synthesized after 15 DPA. Using 5 DPA as a reference, 15,647 non-redundant differentially expressed genes were identified in 10-60 DPA cottonseed. Co-expression gene network analysis identified six modules containing 3275 genes significantly associated with middle-late seed developmental stages and enriched with genes related to the linoleic acid metabolic pathway and α-linolenic acid metabolism. Genes (Gh_D03G0588 and Gh_A02G1788) encoding stearoyl-ACP desaturase were identified as hub genes and significantly up-regulated at 25 DPA. They seemed to play a decisive role in determining the ratio of saturated fatty acids to unsaturated fatty acids. FAD2 genes (Gh_A13G1850 and Gh_D13G2238) were highly expressed at 25-50 DPA, eventually leading to the high content of C18:2n-6 in cottonseed. The content of C18:3n-3 was significantly decreased from 5 DPA (7.44%) to 25 DPA (0.11%) and correlated with the expression characteristics of Gh_A09G0848 and Gh_D09G0870. CONCLUSIONS: These results contribute to our understanding on the relationship between the accumulation pattern of fatty acid components and the expression characteristics of key genes involved in fatty acid biosynthesis during the entire period of cottonseed development.

Carboxylated cellulose nanocrystals with chiral nematic property from cotton by dicarboxylic acid hydrolysis.

Carboxylated cellulose nanocrystals (CNCs) were produced from cotton linter using a mixture of a dicarboxylic acid (maleic acid or succinic acid) and its corresponding anhydride with or without catalyst in acetic acid as solvent. The low solubilities of these dicarboxylic acids can ease chemical recovery and decrease environmental impact (especailly maleic acid is a U.S. FDA approved indirect food additive (21CFR175-177)) and capital costs compared with the conventional concentrated sulfuric acid hydrolysis for producing CNCs. The dicarboxylic-acid-produced CNCs (DC-CNCs) contained surface carboxyl groups of approximately 0.5 mmol/g, with ranges of dimensions of 50-150 nm in diameter and 50-700 nm in length. Birefringence was observed in the DC-CNC suspensions above critical concentrations. However, fingerprint texture was only observed in the DC-CNC suspensions produced with catalyst p-toluenesulfonic acid. Scanning electron microscopy images of the cross section of DC-CNC films revealed a periodic ordered multilayer structure. DC-CNCs were also produced using recycled dicarboxylic acids.

Preparation and identification of antioxidant peptides from cottonseed proteins.

The objective of this study was to investigate the antioxidant properties of cottonseed peptides. Results indicated that cottonseed peptides prepared by enzymatic hydrolysis and microbial fermentation both showed antioxidant properties. The cottonseed protein enzymatic hydrolysate with molecular weight less than 3 kDa exhibited excellent DPPH, ABTS and hydroxyl radical scavenging activity and ferrous ion chelating activity with EC50 values of 0.49 ± 0.02, 2.05 ± 0.02, 2.21 ± 0.12, and 0.99 ± 0.03 mg/mL, respectively. Amino acid composition analysis revealed that cottonseed protein hydrolysates are rich in acidic/basic and aromatic amino acids. In addition, among the 19 identified cottonseed protein-derived peptides, YSNQNGRF had the lowest CDOCKER energy and formed hydrogen bonds with Tyr334, Arg380, Arg415, Ser508, and Ser602, and van der Waals interactions with Asn382, Tyr525, Gln530, and Ser555, which all located in the binding site of Keap1-Nrf2 interaction. These findings suggested that the antioxidant peptides from cottonseed protein had the potential as functional ingredients in foods.

Ag2[Fe(CN)5NO]-Fabricated Hydrophobic Cotton as a Potential Wound Healing Dressing: An In Vivo Approach.

There have been reports of different types of wound dressings for various functions and purposes. Cotton being one of the most widely used wound dressing material due to its non-toxic, biodegradable, and other properties is used for fabrication as well as in the form of scaffolds for faster and effective wound closure. Our research team has already demonstrated the role of silver nitroprusside nanoparticles (SNPNPs) for wound healing and antibacterial activity. In the current study, we have developed cotton fabric impregnated with SNPNPs (SNPCFs) which remain photo inert and displayed long-term antimicrobial activity due to the surface modification with the silver nitroprusside complex. These SNPCFs were characterized by various analytical techniques (XRD, FTIR, UV spectroscopy, TGA, TEM, FESEM, EDAX, ICP-OES). The fabricated cotton dressings with nanoparticles showed an improved water contact angle (113-130°) than that of bare cotton gauze (60°) and exhibited more antibacterial property in case of both Gram-negative bacteria (Klebsiella aerogenes and Escherichia coli) and Gram-positive bacteria (Pseudomonas aeruginosa and Bacillus subtilis) even after several washings. The biocompatible nature of SNPCFs was assessed by in vivo chorioallantoic membrane assay that showed no obstruction in the formation of blood vessels. The SNPCFs exhibited better wound healing activity compared to the bare cotton and AgCFs as observed in the C57BL6/J mouse. The histopathological investigation reveals increase in re-epithelialization and deposition of connective tissue. The macrophage (M2) counts in SNPCF-treated skin tissues were supportive of more wound healing activity than mice treated with cotton fabric impregnated with chemically synthesized silver nanoparticles. Based on biodistribution analysis using ICP-OES, the data illustrated that a significant amount of silver is absorbed in the skin tissues of mice as compared to the blood and kidney. Furthermore, the absence of silver from the vital organs (heart, liver, and kidney) corroborates our hypothesis that the SNPCFs can act excellently in treating wounds when topically applied over skin. Thereafter, all these results highlight a strong possibility that SNPCFs exemplify the potential as a new antimicrobial and wound healing agent in future times.

Relationships Among the Feeding Behaviors of a Mirid Bug on Cotton Leaves of Different Ages and Plant Biochemical Substances.

Apolygus lucorum (Meyer-Dür) (Hemiptera: Miridae) tends to feed on young plant tissues. To explore the relationship between stylet probing behaviors of adult A. lucorum and conditions of cotton leaves, we conducted an experiment using electropenetrography (EPG). Behaviors were recorded on four cotton varieties, in relation to thickness and biochemical traits of differently-aged leaves. Cotton leaf age had a significant effect on the probing behavior of A. lucorum but cotton variety did not. One-day-old leaves of A. lucorum received the highest mean number of stylet probes (penetrations) per insect, and longest mean durations per insect of combined stylet probing or its components, cell rupture and ingestion behaviors. All of the leaf traits (thickness and biochemical substances) were similar among these four cotton varieties. Leaf thickness had a significantly negative effect on the same four variables above. Gossypol and tannin also had a negative impact on combined probing duration. Redundancy analysis showed that the four EPG variables were closely related to nutrient substances (amino acids, sugar, and water) while they had the opposite relationship with plant defense substances (gossypol and tannin). On cotton in the seedling stages, A. lucorum fed more readily on the youngest, thinnest leaves in our no-choice EPG experiments. Nutrients and chemical resistance substances determined the probing duration of A. lucorum. Our findings can contribute to better understanding of patterns of feeding and host consumption by A. lucorum, ultimately improving cotton resistance to A. lucorum.